| Drawing
Name |
General Description |
Specific items to be shown |
General |
| General Arrangement |
General layout of vessel |
Should show layout of compartments (with compartment
name), walkways, stairs, doorways and hatches, main machinery
locations, ventilation, control stations, Watertight bulkheads,
deck equipment, tanks, navigation lights and list basic vessel
particulars. |
| Lines Plan |
Details of hull shape |
Body, profile and plan views of evenly spaced
hull sections through each plane (vertical, horizontal and transverse)
Note:
Transverse sections are referred to as stations or frames
Vertical or profile sections are referred to as buttock lines
Horizontal sections are referred to as waterlines |
| Safety Plan |
Details of safety equipment
and escape plan |
Locations of safety equipment, extinguishers,
exit routes and muster stations. |
Structure |
| Bottom and
deck plan |
Should show
all structural items attached to the deck / bottom plating.
|
Position and description of all
bulkheads, girders, transverse and longitudinal frames, beams,
girders, stringers etc. |
| Profiles |
Outboard and
centreline structural profile |
Outboard profiles should detail
all structure attached to the side shell, including frames,
stringers, bulkheads etc.
Centreline Profile should detail all structure on or passing
through the centreline of the vessel. This should include the
keel, centreline girders and beams and transverse bulkheads,
floors, deck beams etc. |
| Transverse
/ Typical Sections, Bulkhead detail |
Typical frames
and bulkheads detail |
Typical (where similar) or all
frames and bulkheads. Frames should be titled with an identifying
number that corresponds to the position of frames shown on the
plan and profile drawings |
Machinery |
| Machinery Foundations |
Details of girders for
main and auxiliary engines |
Girder location, height and construction material,
position of engine mounts and bolting arrangement etc. |
| Shafting and Stern Tube |
Shafting and stern tube
details |
Size and material details for shaft, bearings,
seals, couplings, shaft brackets, retaining nuts etc. |
| Rudders & Steering Gear |
- |
Details of ruder size and construction, rudder
stock size and material, rudder tube construction, bearings
and seals, emergency steering provisions, main steering gear
equipment etc. |
Systems |
| Bilge |
Bilge system schematic |
Details of bilge pumps capacities and power
source, bilge pickups, pipework size and material, valves, drains,
overboard discharges / holding tanks etc. |
| Ballast |
Ballast system schematic |
Details of ballast pumps and associated pipework
including valves, pickups, strainers, ballast tanks etc. |
| Fire |
Fire system schematic |
Details of fire pumps (location, capacity
and power source), piping size and material, valves, hydrants,
hoses, fixed fire systems etc. |
| Fuel |
Fuel system schematic |
Details of pipework from fuel tanks to machinery,
including piping sizes and material, valves, pumps, spill trays,
fuel tanks (including filling and sounding pipe etc.) |
| Machinery Cooling |
Cooling system schematic |
Details of engine cooling arrangement |
| Electrical |
Electrical system schematic |
Schematic drawing of electrical equipment
including wiring, protection devices, batteries, |
| Other |
Any other relevant ship
system |
Eg: Hydraulic or domestic systems |
